Rule Mate Automatic Pump – 12V is a fully automatic submersibleBilge Pumpdesigned to keep the boatsBilgeclear of nuisance water, with Rule’s exclusive “Spongeability” feature. New innovative design incorporates the>Bilge Pumpand water sensor in a single housing. Unique Rule “Spongeability” feature leaves theBilgethe driest ever – when water in theBilgereaches a certain height the sensor automatically activates and the pump runs until water is pumped out, reducingBoatweight, saving fuel and minimisingBilgeodour. The Rule Mate Automatic Pump also has a pump check feature – simply touch the pump check button andHoldfor a few seconds to test cycle the pump.

Features

– Fully automatic submersibleBilge Pumpsystem
– Bilge water sensor and pump in a common housing
– Will not pump oil.Sensor has eco-friendly feature in that it can sense oil vs the dielectric constant of water and an oil spill will not engage the pump automatically (note: not to be considered as an oil safety measure device)
– Internal water level sensor switches on at 62mm high level to removeBilgewater and will switch off when down to 16mm (with hidden air vents to prevent air locking)
-No battery drain other than when pump is in use
– Removable strainer and impeller area are accessible to clear debris
– Threaded ports for easy installation. Straight and 90 deg included
– Pump and switch are internally wired for easy installation
– 3rd wire allows for manual over-ride usingRule switch panelor it can activate an alarm or indicator lamp
– Thermal overload protection
– Single touch test button feature

Specifications

500GPH
– 12V
– 1.8 Amp

800GPH
– 12V
-3.0 Amp

1100GPH
– 12V
– 3.8 Amp